The posting names J-STD-001, IPC-A-610 or IPC/WHMA-A-620
Manufacturing and Technician Space Jobs That Ask for IPC Certification
188 IPC workmanship space manufacturing and technician jobs are open today, in 18 US states and abroad. Read every night from the employers' own job boards, each with its full posting and the pay it states.
Newest IPC workmanship space manufacturing and technician jobs
The newest 150 of 188, newest first; each state's page below lists every one in that state.
- AIT Technician – EPS Module Assembly (Weekday Shift)“J-STD-001 certification is preferred but not required.”$28–$37/hr
- Senior Avionics Manufacturing Technician“Current or previous certifications in IPC J-STD-001, IPC-A-610, IPC/WHMA-A-620, or applicable NASA workmanship standards.”$30–$38.46/hr
- QA Manager/Hardware Manufacturing (Manager, Quality Assurance) - Marlborough, MA“Hands-on experience with J-STD-001 requirements and compliance standards”
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
- Electrical Technician“IPC-J-STD-001 Certification”
- Sr. Integration Technician“Deep understanding of industry and NASA workmanship and fastener standards (NASA-STD-8739 series, NASA-STD-5020, J-STD-001, IPC/WHMA-A-620)”$35–$51/hr
- Lead Research & Development Manufacturing Technician (L4), ALG“o IPC J-STD-001 Certification (Space Addendum)”$43.99–$58.75/hr
- Senior Avionics Technician“Assemble, rework, and inspect printed circuit board assemblies to IPC-A-610 / J-STD-001 Class 3 workmanship: stencil printing, reflow, fine-pitch hand soldering, component rework, cleaning, and conformal coating.”$36.00–$60.00/hr
- Associate Technician“Complete IPC J-STD-001 and IPC/WHMA-A-620 certification during your first year.”$23.00–$30.00/hr
- Manufacturing Specialist - 2nd Shift“Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware”$34.00–$40.00/hr
- Sr. Structures Manufacturing Engineering“Experience working with harnessing and familiarity with NASA-STD-8739.4, J-STD-001, and IPC/WHMA-A-620”$150,000–$200,000/yr
- DoW SkillBridge Program – Technicians“Apply industry standards for quality and workmanship (e.g., IPC-A-610, IPC/WHMA-A-620 Space Addendum, J-STD-001).”
- Electrical Assembler“Soldering skillsets to J-STD-001 and IPC610.”$33–$40/hr
- Sr. Harness Technician“Harness Technician with demonstrated expertise in wire harness fabrication, integration, and testing in accordance with IPC/WHMA-A-620 Class 3 standards.”$40–$51/hr
- Technician III - Development Technician“Fabricate and rework flight/EDU hardware (PWAs, cables, chassis, and rack assemblies) per IPC/WHMA-A-610/620 Space Addendums and J-STD-001.”$57,319–$91,710/yr
- AIT Technician – EPS Module Assembly (Weekend Shift)“Knowledge of soldering tools and practices (J-STD-001 certification preferred but not required)”$28–$37/hr
- Assembly, Integration & Test (AI&T) Technician“J-STD-001 soldering certification.”$36–$40/hr
- Avionics Technician“IPC certification or experience working to IPC workmanship standards, including IPC J-STD-001”
- Electromechanical Technician“IPC J-STD-001 and/or NASA-STD-8739 soldering, cable, crimp, and harness certifications.”
- Lead Avionics PCBA Technician“Working knowledge of IPC-A-610 and J-STD-001 workmanship requirements, ESD controls, and safe handling of sensitive electronic assemblies”$45.32–$67.98/hr
- Electro - Mechanical Technician II“Must have the ability to successfully achieve the following certifications with the first 90 days of employment: IPC J-STD-001 Solder Certification with Space Addendum, NASA-STD-8739.4 Cable Harness Certification, ...”$27.42–$38.39/hr
- Instrumentation & Controls Technician“Certifications: IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, J-STD-001, and/or ANSI/ESD S20.20”
- Senior Multi-Disciplinary Technician“Workmanship certifications such as IPC/WHMA-A-620, J-STD-001 or NASA-STD-8739.4.”$54/hr
- Space Tech Technologist“J-STD-001 certification with Space Addendum, IPC/WHMA-A-620 certification, and/or IPC-A-610 certification.”$21–$38/hr
- Harness Technician“Fabricate, assemble, and test cable harnesses including crimping, soldering, shielding, lacing, connector integration, and strain relief in compliance with aerospace workmanship standards such as IPC-A-620.”
- Engineering Technician“Perform high-reliability PCB assembly and rework in accordance with IPC-A-610 standards, including through-hole components, conformal coating, inspection, and microscope-level rework to support flight and engineering ...”
- SMT Technician“Inspect solder quality using microscopes, AOI, and X-ray to IPC-A-610 standards, documenting defects and root causes”$33–$43/hr
- Production Control Associate, 4th Shift, Site 2 (BSAT, CSAT, PLM, Bldgs 8/9/10/12)“IPC-A-610, IPC/WHMA-A-620, J-STD-001, or similar electronics assembly/testing certifications.”
- Electro - Mechanical Technician“Must have the ability to successfully achieve the following certifications with the first 90 days of employment: IPC J-STD-001 Solder Certification with Space Addendum, NASA-STD-8739.4 Cable Harness Certification, ...”$22.68–$31.74/hr
- Electronics Process Technician“Compliance: Evaluate components under heavy microscopy to verify compliance with industry standards like IPC-A-610 and J-STD-001.”$40.14–$60.34/hr
- Production Manager - Starlink Insourcing (Injection Molding)“Working experience with IPC-A-610 and J-STD-001 manufacturing for Class 3 products.”
- Electronics and Harness Technician“IPC J-STD-001 Certified IPC Specialist (CIS) or equivalent solder workmanship certification”$30.05–$38.46/hr
- Manufacturing Engineer III – Electrical Test Automation“Familiarity with industry standards such as NASA-STD-8339.1, NASA-STD-8739.4, IPC-A-600/610/620, IPC-7711/7721, J-STD-001 with Space Addendum, and DO-254”$102,721–$143,809/yr
- Production Manager, Avionics and Electro-Mechanical“Familiarity with J-STD-001, IPC/WHMA-A-620, ESD control, and flight hardware traceability”$150,000–$190,000/yr
- Manufacturing Technician B“IPC-J-STD-001 Space Addendum soldering certifications.”
- Supervisor I – Development Technician“Assign staff to support department work requirements.</li><li>Regularly direct the work of 10 or more regular, full-time employees.</li><li>Have the authority to suggest and recommend the hiring, discipline, advancement, ...”$79,365–$134,921/yr
- Avionics Manufacturing Engineer (All Levels)“Experience with IPC workmanship standards such as J-STD-001, IPC-A-610, and IPC/WHMA-A-620, including space addenda”$140,000–$230,000/yr
- Quality Inspector“Experience with IPC standards (e.g., J-STD-001, IPC-A-610, IPC/WHMA-A-620), or company equivalent workmanship standards”$100,000–$135,000/yr
- Structures and Mechanisms Manufacturing Engineer“Experience working with harnessing and familiarity with NASA-STD-8739.4, J-STD-001, and IPC/WHMA-A-620”$155,000–$175,000/yr
- Avionics Technician (Second shift)“IPC-A-610 or IPC-7711/7721 certification, or equivalent industry-recognized training.”$25–$55/hr
- Manufacturing Engineer (Avionics / RF Electronics)“Familiarity with workmanship and electronics manufacturing standards such as IPC-A-610, J-STD-001, or equivalent aerospace requirements”$100,000–$200,000/yr
- Lead Manufacturing Technician, Avionics“Support the company strategy by holding ourselves and one another accountable for getting the work done.</span></p><p> </p><p> </p><p><span style="font-family: arial, helvetica, sans-serif;"><strong>Current Work Schedule ...”$72,134–$105,019/yr
- Manufacturing Engineer III – B Shift - Harness Fabrication“Strong understanding of engineering fundamentals for Avionics Electro-mechanical design and manufacturing, including knowledge of GD&T, Electrical Theory Fundamentals, and NEC with IEC/IPC/WHMA-A-610, 620 and J-STD-001 ...”
- Avionics Dev Lab Technician“Current or expired certifications in PCBA inspection (IPC-A-610),harness assembly (IPC/WHMA-A-620), soldering (J-STD-001), PCBA rework (IPC-7711/7721)”
- Avionics Dev Lab Technician Level II“Current or expired certifications in PCBA inspection (IPC-A-610),harness assembly (IPC/WHMA-A-620), soldering (J-STD-001), PCBA rework (IPC-7711/7721)”
- Manufacturing Engineer III - Panels Subassemblies“Experience building avionics or harness assemblies, including splicing and sensor surface prep, IPC/WHMA-A-620 Space Addendum certification (J-STD-001 a plus), and ESD and FOD prevention.”
- Senior Manufacturing Engineer - Motor Windings“Familiarity with industry standards such as IPC-A-610, IPC/WHMA-A-620, J-STD-001 with Space Addendum, NASA-STD-8739.4, and NEMA MW 1000 (magnet wire), or equivalent automotive quality standards (e.g., IATF 16949, PPAP, ...”$123,611–$173,055/yr
- Sr. Manufacturing Interconnection Engineer (Connector, Harness & Cable)“Experience with high-reliability connectors, high-speed/RF cabling, and space-grade wire and harness standards (IPC/WHMA-A-620, NASA-STD-8739).”$156,802–$219,522/yr
- Electronics Production Technician“IPC/WHMA-A-620: Requirements and Acceptance for Cable and Wire Harness Assemblies with Space and Military Applications (Electronic Hardware Addendum)”
- Test Technician, Silicon Assembly (Starlink)“J-STD-001 Certification is a plus”
- Avionics Development Technician (Starshield)“IPC and/or J-STD certification, including IPC-A-610, IPC-7711/7721, or J-STD-001”$26.00–$32.00/hr
- Assembly & Integration Technician III“J-STD-001 Certification with Space Addendum IPC-620 Certification”$25–$38/hr
- Integration Technician I“Current or expired harness assembly, crimping and soldering certifications (IPC/WHMA-A-620, IPC-A-610 and J-STD-001, or equivalent)”$24.74–$34.63/hr
- (Skillbridge) Manufacturing Technician (Level 2)“J-STD-001 soldering, ordnance handling, and mechanical assembly”$24.71–$41.15/hr
- Electronic Manufacturing Technician“IPC J-STD-001 Certification.”$25.00–$32.00/hr
- Sr. Electronics Manufacturing Technician“Perform hand soldering of surface mount (SMT) and through-hole components in accordance with IPC J-STD-001 requirements.”$35.00–$40.00/hr
- Production Technician & Equipment Operator“Solder and perform PCB handling, incoming and in-process inspection to IPC J-STD-001 workmanship criteria, and functional/continuity testing”$30–$50/hr
- Principal Manufacturing Engineer (Avionics / Electromechanical / Harnessing)“Demonstrated experience with wire harness fabrication, IPC/WHMA-A-620 standards, and connector assembly (e.g., D-sub, circular MIL-spec, coax)”$181,913–$262,763/yr
- Senior Manufacturing Engineer (Avionics / Electromechanical / Harnessing)“Demonstrated experience with wire harness fabrication, IPC/WHMA-A-620 standards, and connector assembly (e.g., D-sub, circular MIL-spec, coax)”$140,333–$202,703/yr
- Production Line Lead“Solder and perform PCB handling and in-process inspections in accordance with applicable IPC J-STD-001 workmanship criteria, as well as functional and continuity testing when required.”$35–$55/hr
- Technical Specialist III, Avionics Test & Production“IPC/WHMA-A-620 or J-STD-001 certification”
- Avionic Technician QV, 4th Shift, Site 2“Ensure compliance with IPC/WHMA-A-620, NASA-STD-8739.4, and company quality standards.”
- Avionic Technician QV, 3rd shift, Site 2“Ensure compliance with IPC/WHMA-A-620, NASA-STD-8739.4, and company quality standards.”
- Avionic Technician QV, 2nd shift, Site 2“Ensure compliance with IPC/WHMA-A-620, NASA-STD-8739.4, and company quality standards.”
- Avionic Technician QV, 1st shift, Site 2“Ensure compliance with IPC/WHMA-A-620, NASA-STD-8739.4, and company quality standards.”
- Electromechanical Assembly & Test Technician“Certification to IPC/WHMA-A-620, IPC-A-610, J-STD-001, or an equivalent workmanship standard, plus ESD control training (ANSI/ESD S20.20) and NFPA 70E arc flash training”
- Specialist, Manufacturing Engineering“J-STD-001, IPC/WHMA-A-620, MIL-STD-883, NASA 8739.1/8739.4, etc.”
- Technician - Avionics | All Shifts All Levels“Maintain compliance with IPC/WHMA-A-620, J-STD-001, and internal quality requirements.”
- Technician – Engineering Aide III“Experience with soldering standards such as IPC J-STD-001 or NASA-STD-8739.”$36.60–$51.23/hr
- Cabling & Harnessing Technician Level 2 or Level 3 (2nd Shift)“J-STD-001 Soldering Certification (expired okay- current preferred)”$56,000–$93,400/yr
- Manufacturing Technician (Level 2)“J-STD-001 soldering, ordnance handling, and mechanical assembly”
- Senior Avionics Development Technician (Test Racks)“IPC Certified for PCB and cable harness rework (IPC-A-610, IPC-A-620)”$40–$52/hr
- Sr. PCBA Manufacturing Engineer“Experience with IPC-A-610 Class 3, IPC J-STD-001 compliance”$137,300–$185,700/yr
- Electromechanical Technician“Fabricate, assemble, and test cable harnesses including crimping, soldering, shielding, lacing, connector integration, and strain relief in compliance with aerospace workmanship standards such as IPC-A-620.”
- (C Shift) Manufacturing Engineer II - Avionics/Harness Fabrication“Familiarity with industry standards such as IPC-A-600/610/620, J-STD-001, and DO-254”$91,852–$128,592/yr
- Manufacturing Engineer – Blue Ring Cable Harness Shop III“Ensure all work aligns with applicable quality and safety standards (AS9100, ISO 9001, IPC/WHMA-A-620), supporting a safe and sustainable future in space.”
- Launch Integration Technician III“Has worked with IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, J-STD-001 or ANSI/ESD S20.20”
- Vehicle Integration Technician II“Two or more years of experience in one or more of the following fields:Has worked with IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, J-STD-001 or ANSI/ESD S20.20”
- PCBA Conformal Coating Technician“Current or prior certification in IPC-A-610 or J-STD-001”$50,700–$91,650/yr
- SMT Specialist“Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware”$34.00–$40.00/hr
- Technician - Avionics | All Levels All Shifts“Certified in IPC/WHMA-A-620 Cable and Wire Harness Assemblies, J-STD-001 Solder (including Space Addendum), NASA-STD-8739.4.”
- Cable Technician“5+ years in cable build industry IPC J-STD-001 certification IPC 620 certifications FOD awareness ESD awareness Ability to work in tight spaces requiring bending, crouching Self-starter requiring minimal to no ...”$39,400–$68,200/yr
- Principal Microelectronics Engineer“Experience with J-STD, MIL-STD requirements and Space Class hardware requirements, including AS9100, J-STD-001, IPC-A-610.”$108,800–$163,200/yr
- Temporary CCA Semi-Conductor Assembler“Previous/Active certifications and experience with NASA 8739 and/or J-STD-001 Space Addendum preferred”$20–$22/hr
- Test Technician, Electrical and Electronics, 3rd shift, Site 4“IPC, J-STD-001, or related electronics assembly/testing certifications are a plus.”
- Test Technician, Electrical and Electronics, 2nd shift, Site 4“IPC, J-STD-001, or related electronics assembly/testing certifications are a plus.”
- Spacecraft PCBA Manufacturing Engineer“Familiarity with IPC workmanship standards, including IPC-A-610 and J-STD-001.”
- Avionic Technician, 2nd shift, Site 2“Ensure compliance with IPC/WHMA-A-620, NASA-STD-8739.4, and company workmanship standards.”
- Avionic Technician, 3rd shift, Site 2“Ensure compliance with IPC/WHMA-A-620, NASA-STD-8739.4, and company workmanship standards.”
- Electronics Manufacturing Engineer“Strong understanding of electronics manufacturing standards (IPC-A-610, J-STD-001, or equivalent)”$144,179–$201,850/yr
- Aerospace Vehicle Technician Senior 1st Shift“Certification to J-STD-001 space, NASA.STD.8739.4”$29.42–$47.09/hr
- Aerospace Vehicle Technician Senior 2nd Shift“Certification to J-STD-001 space, NASA.STD.8739.4”$29.42–$47.09/hr
- Electronic Optical Technician“IPC-610 or J-STD-001 certification for soldering and electronics assembly”$75,000–$110,000/yr
- Group Lead - Assembly Technician Team“Strong working knowledge of J-STD-001 (Space Addendum), IPC-A-610, and/or IPC/WHMA-A-620 standards”$68,000–$103,750/yr
- Electronics Technician III“Skills </b></br><ul><li>General knowledge of electrical/RF test equipment (spectrum analyzer, oscilloscope, DVM, etc.) and antenna troubleshooting.</li><li>Experience with machining, including vertical mills, routers, ...”$57,319–$91,710/yr
- Assembly Integration & Test Technician III - A Shift“Current IPC-WHMA-A-620 certification.”$28–$35/hr
- Assembly Integration & Test Technician II - A Shift“Current IPC-WHMA-A-620 certification.”$25–$31/hr
- SMT Rework Technician - Multiple Shifts (Starlink)“Possess IPC-A-610, J-STD-001, and/or IPC-7711/7721 (rework/repair) certification.”
- Aerospace Production Technician II“J-STD001-FS certification”$43,000–$54,000/yr
- Electrical Technician“Perform high-reliability PCB assembly and rework to applicable IPC J-STD-001 and Space and Military Addendum requirements, with inspection to the specified acceptance criteria, including fine-pitch SMT, through-hole ...”
- Manufacturing Engineer II (Avionics / Electromechanical / Harnessing)“Demonstrated experience with wire harness fabrication, IPC/WHMA-A-620 standards, and connector assembly (e.g., D-sub, circular MIL-spec, coax)”$119,543–$172,673/yr
- Test Technician (Starlink)“Experience with NASA STD 8739.4, IPC-620, and J-STD-001 qualifications”$23.00–$29.00/hr
- Integration Technician III“Current or expired harness assembly, crimping and soldering certifications (IPC/WHMA-A-620, IPC-A-610 and J-STD-001, or equivalent)”$36.60–$51.23/hr
- Hardware Development Specialist – Harnessing, Amazon Leo DevOps“Experience fabricating, inspecting, and/or reworking wire harnesses or cable assemblies to a standardized workmanship specification such as IPC/WHMA-A-620, NASA-STD-8739.4, MIL-W-5088, or T.O. 1-1A-14 (or service ...”$39.47–$69.08/hr
- Technician - Test & Launch Ops Sr.“IPC J-STD-001 certification, including the GS Space Addendum.”$24.74–$34.63/hr
- Harness Manufacturing Engineer“Working knowledge of IPC/WHMA-A-620 Class 3 workmanship requirements”$114,200–$142,700/yr
- Manufacturing Engineer“Translate schematics, assembly drawings, and IPC-A-610 / J-STD-001 workmanship criteria into inspection and test procedures embedded directly in digital work instructions and travelers”
- Avionic Technician, 4th shift, Site 2“Ensure compliance with IPC/WHMA-A-620, NASA-STD-8739.4, and company workmanship standards.”
- Optical Manufacturing Engineer“Experience with integrated electro-optical assemblies, including harnessing and PCBA/enclosure assembly, and familiarity with IPC-A-610, J-STD-001, and IPC/WHMA-A-620 workmanship standards”$100,000–$140,000/yr
- Solar Technician (All Levels)“IPC J-STD-001/IPC-A-610 certifications (CIS) or NASA-STD-8739 series training”
- Technician - Avionics (Engines) - All Levels - All Shifts“Current or expired certifications in PCBA inspection (IPC-A-610), harness assembly (IPC/WHMA-A-620), soldering (J-STD-001), PCBA rework (IPC-7711/7721)”$43.74–$61.24/hr
- Principal Electrical Manufacturing Engineer“Strong understanding of IPC standards (e.g., IPC-A-610, IPC-A-600, J-STD-001) for PCB/PCBA workmanship and inspection”$175,000–$200,000/yr
- PCB Manufacturing Engineer“In depth knowledge of industry specifications and requirements (IPC-2221, IPC-A-600, IPC-A-610, etc.)”$100,000–$130,000/yr
- Senior Electrical Manufacturing Engineer“Strong understanding of IPC standards (e.g., IPC-A-610, IPC-A-600, J-STD-001) for PCB/PCBA workmanship and inspection”$140,000–$175,000/yr
- Electrical Manufacturing Engineer“Familiarity with IPC standards (e.g., IPC-A-610, IPC-A-600, J-STD-001) for PCB/PCBA workmanship and inspection”$100,000–$140,000/yr
- TIG Welder (Starship Electronics)“NASA-STD-8739.3, IPC-A-610, or equivalent (a plus)”$23.00–$27.00/hr
- Surface Mount Assembler A (Solering + IPC)“Current J-STD-001 soldering certification, or the ability to obtain and maintain certification, is required.”$32.43/hr
- Surface Mount Assembler A“Current J-STD-001 soldering certification, or the ability to obtain and maintain certification, is required.”$32.43/hr
- Avionics Wire Harness Technician II“Familiarity with standards like IPC-A-620, J-STD-001, NASA-STD-8739, or equivalent aerospace wiring quality programs.”$32–$47/hr
- Electromechanical Assembler“Visual inspection of solder joints, wiring & staking to IPC J-STD-001”$39,000–$52,000/yr
- Dev Harnessing Technician II, Amazon Leo DevOps“Fabricate harnesses using crimping, soldering, lacing, shielding, and connector assembly techniques per IPC/WHMA-A-620 and aerospace standards.”$38.50–$42.50/hr
- Sr. Test Process Engineer“Familiarity with standards for PCBA manufacturing and test, such as IPC-A-610 (Acceptability of Electronic Assemblies)”$137,300–$185,700/yr
- PCBA SMT Technician“IPC-A-610 certification and experience with Class 3 and J-STD-001 Space Addendum assemblies”$30–$60/hr
- PCBA Conformal Coating Technician“IPC-A-610 certification and experience building to Class 3 and J-STD-001 Space Addendum standards.”$30–$60/hr
- Test Technician, Electrical and Electronics, 1st shift, Site 4“IPC-A-610, IPC/WHMA-A-620, J-STD-001, or similar electronics assembly/testing certifications.”
- Aerospace Production Technician III“J-STD001-FS certification”$49,000–$62,000/yr
- Avionics Manufacturing Engineer, Solar Array“Familiarity with industry standards relevant to solar arrays and avionics manufacturing, such as IPC/WHMA-A-620 (harnesses), IPC-A-610 (electronic assemblies), and NASA workmanship standards..”$120,000–$245,000/yr
- Manufacturing Electrical Test Engineer“J-STD-001 with Space Addendum (Requirements for Soldered Electrical and Electronic Assemblies)”$85,800–$180,200/yr
- Manufacturing Planner III - Cable Harness Systems“Strong understanding of engineering fundamentals for Avionics Electro-mechanical design and manufacturing, including knowledge of GD&T, Electrical Theory Fundamentals, and NEC with IEC/IPC/WHMA-A-610, 620 and J-STD-001 ...”
- Technician - Test & Launch Ops (Instrumentation and Controls)“Certifications: IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, J-STD-001, and/or ANSI/ESD S20.20”
- PCBA Conformal Coating Technician-weekend shift“Current or prior certification in IPC-A-610 or J-STD-001”$40,300–$72,850/yr
- Supervisor, Avionics Manufacturing - Electro Mechanical“Train and onboard new team members in electronics assembly techniques, soldering workmanship standards, and IPC J-STD-001 requirements, ensuring all personnel meet and maintain applicable soldering certification ...”$96,760–$137,352/yr
- Supervisor, Avionics Manufacturing - Harnessing“Train and onboard new team members in harness assembly techniques, workmanship standards, and IPC/WHMA-A-620 requirements, ensuring all personnel meet certification expectations.”$96,760–$137,352/yr
- AIT Technician – Vehicle Integration (Weekday Shift)“Knowledge of soldering tools and practices (J-STD-001 certification preferred but not required)”$28–$37/hr
- Avionics Technician II“IPC J-Std-001 and/or IPC-620 certification, NASA 8739.4 certified.”
- Test Technician (Starlink Aviation)“Experience with AS9100, IPC-620, and J-STD-001 qualifications”$23.00–$29.00/hr
- Sr. Electromechanical Assembly & Test Technician“Certification to IPC/WHMA-A-620, IPC-A-610, J-STD-001, or an equivalent workmanship standard, plus ESD control training (ANSI/ESD S20.20) and NFPA 70E arc flash training”
- Sr Factory Manager (Electronic Supply Chain)“Deep expertise in space-grade electronics manufacturing, including familiarity with J-STD-001 Space Addendum, IPC-A-610 Space Addendum, and AS9100 requirements”$137,300–$185,700/yr
- Integration Technician“IPC-A-610, IPC/WHMA-620, and IPC-J-STD-001 certification (currently or previously held)”$23–$57/hr
- Machine Maintenance Technician (Starlink)“Current or past certification for IPC-J-STD-001 and/or IPC-A-610”
- Senior Electronics Technician“Advanced IPC certifications (IPC-A-610, IPC J-STD-001 Space Addendum)”
- Senior Production Technician, Electronics“Soldering and rework to IPC Class 3 (IPC-A-610 / J-STD-001) or ECSS standard; certified, or able to certify during probation.”
- Electronics Manufacturing Technician - PCBA & Harness (High-Reliability / Aerospace)“Work in accordance with IPC/WHMA-A-620 standards (preferred)”
- Production Team Lead, Satellite Electronics Subsystems“Development: Recruit, train, certify (J-STD-001, IPC-A-610, ESD), and mentor a team of 10–15 technicians using visual management and Lean frameworks.”
- Satellite Production Senior Technician, Electronics“Advanced IPC certifications (IPC-A-610, IPC J-STD-001 Space Addendum)”
- Supplier Development Manager (SDM)“IPC/WHMA-A-620 certification or knowledge of certification requirements;”
- PCBA /Soldering Technician (m/f/x)“Experience producing J-STD-001, IPC-A-610 or equivalent hardware”
- Avionics AIT Technician (m/f/d)“Knowledge of IPC/WHMA-A-620, ECSS, MIL-STD, or comparable aerospace and electrical standards.”
- Electronics Technician – Quality and Testing (m/f/d)“Practical knowledge of IPC-A-610 or equivalent workmanship standards.”
- Satellite Production Technician“Familiarity with workmanship standards such as IPC-A-610, IPC J-STD-001, IPC-7711/7721 or IPC/WHMA-A-620.”
- Senior Satellite Production Technician“Familiarity with workmanship standards such as IPC-A-610, IPC J-STD-001, IPC-7711/7721 or IPC/WHMA-A-620.”
Selected agencies hiring now
Moseley Technical ServicesEngineering and technical staffing agency
Engineering and technical staffing firm in Huntsville, Alabama, placing engineers and A&P, sheet metal, CNC and quality technicians.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
Zobility (RGBSI)Engineering and technical staffing agency
RGBSI's staffing and workforce division, renamed Zobility (Troy, Michigan), placing engineers, technicians, IT staff and procurement and supply chain people with aerospace, defense and automotive employers.
Places: Mechanical, Avionics, Systems & Test, Technicians
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. You pay nothing for it, and the fee never comes out of your pay. Employers' own jobs below keep their own order.
IPC certification space manufacturing and technician jobs by state
Employers with the most IPC workmanship space manufacturing and technician jobs
Technicians: new openings every week
Fresh Technicians openings land all week. We gather them into one email so you don't have to keep looking. Free.
Frequently asked questions
How many IPC workmanship space manufacturing and technician jobs are open?
188 today, at 59 employers in 18 US states and abroad, the most in California (65), Texas (28), Washington (21). This page lists the newest 150; each state's page lists the state's own.
How much do IPC workmanship space manufacturing and technician jobs pay?
112 of them state a salary, with a median of $83.2k a year (the middle of each posted range). Technician roles are often paid by the hour, with overtime and shift pay on top.
Do these space manufacturing and technician jobs require an IPC card?
Some require a current card, others accept an expired one or list it as preferred; the line quoted under each title shows which.
IPC certification jobs in other fields
- Quality and Mission Assurance Space Jobs That Ask for IPC Certification (62)
- Avionics and Electrical Space Jobs That Ask for IPC Certification (38)