TIG Welder (Starship)
- US citizenship
- ITAR / US person
- Welding certification
Open in 2 locations
SpaceX posts this job separately for each location. Apply to the one where you can work: the team, schedule and pay can differ between locations.
Texas
2 openStarbase, TX (opens on this page)
Posted 1d ago
Starbase, TX (opens on this page)
Posted 3mo ago
California
1 open- $23.00–$27.00/hr
Hawthorne, CA (opens on this page)
Posted 5mo ago
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
TIG WELDER (STARSHIP)
Tank fabricators will work to build the primary airframe of the Starship and Super Heavy vehicles. The tank fabricator will work with an elite team of other fabricators and technicians to rapidly build the tank (cylindrical structure), tank bulkheads, and other large associated structures for the flight article design of both vehicles.
RESPONSIBILITIES
- GTAW class A welds; cut, trim, fit and fabricate metal components to dimensions for building and assembling
- Collaborate with lead welder to ensure that the proper weld procedure, type of material and rod size are accurately assessed for each welding project
- Analyze engineering drawings and specifications to plan welding operations where procedural information is unavailable
- Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly
- Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment
- Weld assembly and fabrication of various small to large scale structures and assemblies
- Effectively communicate with management/supervisors, engineering staff and planners to achieve build efficiency
- Modify repair, assemble, and install launch vehicles
- Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing
- Handle and dispose of hazardous materials in approved manner
- Install and assemble custom and off-the-shelf tooling and machinery for building primary tank structure
- Setup of safety equipment and work platforms at elevation
- Operate general shop equipment and vehicles (forklifts, boom lifts, scissor lifts, etc.)
BASIC QUALIFICATIONS
- High school diploma or equivalency certificate
- 1+ years of experience with TIG welding in a manufacturing environment or certificate of completion for welding from an accredited program within the last two years
PREFERRED SKILLS AND EXPERIENCE
- 10+ years of experience in TIG welding with one or more of the following materials: stainless steel, carbon steel, Inconel, aluminum and titanium
- Highly proficient in tube cutting, grinding and fabrication
- Highly experience in class A welds
- Certifications with AWS D17.1 and D1.2
- Knowledge in DC welding techniques, and engineering requirements
- Knowledge in standard tools, materials, motions, and practices of the welding trade
- Knowledge in occupational hazards and effective safety precautions of the trade
- Knowledge in arc air procedures and equipment
- Experience in overhead cranes and forklifts
- Use of precision measuring instruments
- Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment
ADDITIONAL REQUIREMENTS
- Role requires passing a weld test per AWS D17.1
- Must be available for all shifts (day shift, 6 AM - 6 PM or night shift, 6 PM - 6 AM), overtime and weekends as the schedule varies depending on site operational needs; flexibility is required
- Ability to work at elevated heights (up to 200 feet) and in confined spaces
- Typically exposed to work in extreme outdoor environments – heat, cold, rain
- Work performed in an environment requiring exposure to fumes, odors, and noise
- Stand: Up to 10 hours per day
- Sit: Up to 1 hour per day
- Push/Pull: Up to 75lbs. (unassisted) 30 minutes to 1 hour per day
- Overhead reach: Up to 6 hours per day
- Walk: Up to 6 hours per day
- Lift/Carry: Up to 50lbs. (unassisted) 15 minutes or less per day
- Climb (ladder/stairs): Up to 3 hours per day
- Kneel/Crouch: Up to 6 hours per day
- Upper body twist: Up to 6 hours per day
- Ability to work in temperatures over 80 degrees 30 minutes or less per day
- Candidate must be capable of safely using an air purifying respirator, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description. Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review.
ITAR REQUIREMENTS
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting for Starbase, TX, checked 16 Nov 2026. Requirements, and whether the role is still open, are settled on the employer's own page.
Selected agencies hiring now
AeroteamsEngineering and technical staffing agency
Aviation staffing firm in Greensboro, North Carolina, placing A&P mechanics, inspectors, sheet metal, paint and fuel tank technicians on contract with aircraft maintenance and modification teams nationwide.
Places: Technicians, Quality
NESC Staffing (Nesco Resource)Engineering and technical staffing agency
Engineering and technical staffing firm placing engineers, designers, technicians and manufacturing staff on contract and direct hire.
Places: Mechanical, Avionics, Systems & Test, Technicians
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. You pay nothing for it, and the fee never comes out of your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Before you apply, free help with this posting: test your resume against it, draft answers to its questions or browse all our free tools.
New space manufacturing and technician jobs, by email
A weekly email with the newest of them, pulled from the companies' own career sites, with the pay each one lists. Free; unsubscribe in one click.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 50.4% of its open jobs state their pay
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More open jobs at SpaceX
- Full Stack Software Engineer (Starlink)$150,000–$175,000/yr
- Sr. Full Stack Software Engineer (Starlink)$200,000–$280,000/yr
- Sr. Materials Engineer, Polymer Development$135,000–$215,000/yr
- Lead Electrical Engineer, Hardware Reliability (Starshield)$165,000–$230,000/yr
- Sourcing Specialist (Starship)
- Sourcing Specialist (Raptor)$85,000–$110,000/yr
More space manufacturing and technician jobs
- Sr. Structures Manufacturing Engineering$150,000–$200,000/yr
- Manufacturing Engineering, Propulsion$86,100–$122,220/yr
- Production Planner/Scheduler - Level 1$49,500–$91,900/yr
- Welding Engineer (All Levels)$115,000–$205,000/yr
- Produktionsmitarbeiter mit Erfahrung in der Schneiderei (all genders)
- Manufacturing Engineer$114,200–$142,700/yr
A certified technician, machinist or welder?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It's free, and one click in any email stops it.