Materials Engineer, Metals Joining (Starmind)
- US citizenship
- ITAR / US person
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
MATERIALS ENGINEER, METALS JOINING (STARMIND)
SpaceX is leveraging its experience deploying and operating the world’s largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. Realizing this vision demands highly reliable, high performance electrical compute hardware, solar power systems, thermal radiators, and more. These systems must operate in the extreme environment of space while delivering the connectivity, control, power distribution, and processing needed for orbital AI inference.
The Starmind team designs, builds, and operates the orbital compute fabric of the future, developing key in-house technologies from satellites’ flight computers and power systems to custom compute electronics, memory, and networking for on-orbit data centers. As a Materials Engineer you will serve as a technical owner for metal joining across Starmind hardware - developing, qualifying, and sustaining welding, brazing, soldering, and diffusion bonding processes for compute, power, and thermal management assemblies, including liquid-cooled cold plates, heat exchangers, thermal radiators, and hermetic electronics packaging. You will define joint designs and process specifications, establish the joint properties and acceptance criteria the design community relies on, and scale robust joining processes from prototype to high-rate production.
RESPONSIBILITIES
- Owned development, qualification, and troubleshooting of metal joining processes for Starmind satellite and ground hardware, including fusion welding (laser, electron beam, and tungsten inert gas), friction stir welding, resistance welding, vacuum and controlled-atmosphere brazing, soldering, and diffusion bonding
- Supported material selection and manufacturing for metallic and joined assemblies such as liquid-cooled cold plates, heat exchangers, thermal radiators, structures, power electronics, and hermetic enclosures
- Defined joint designs, filler metals, braze alloys, interlayers, and process parameters, and wrote the material and process specifications, process control plans, and acceptance criteria
- Developed mechanical and physical properties of base metals and joints, including strength, fatigue, fracture toughness, and thermal and electrical conductivity, through thermal cycling and on-orbit environments
- Set inspection and nondestructive evaluation methods, including computed tomography, radiography, ultrasonic C-scan, helium leak testing, and proof and burst testing, to verify joint integrity and leak-tightness
- Investigated joint and material failures with fractography, metallography, and characterization testing, and drove corrective actions into design and production
- Partnered with design, manufacturing, quality, and suppliers to design for joinability, qualify outsourced welded, brazed, forged, and cast hardware, and move processes from prototype to high-rate production
BASIC QUALIFICATIONS
- Bachelor’s degree in materials science, materials engineering, welding engineering, metallurgical engineering, or another science, technology, engineering, or mathematics field
- Experience with metal-joining processes, including welding, brazing, soldering, and diffusion bonding, and with alloys commonly joined in aerospace and electronics hardware, such as aluminum, copper, stainless steel, nickel, and titanium
PREFERRED SKILLS AND EXPERIENCE
- Master’s degree or PhD in materials science, materials engineering, welding engineering, metallurgical engineering, or another science, technology, engineering, or mathematics field
- First-principles understanding of joining metallurgy, including solidification, wetting and capillary flow, interdiffusion and intermetallic formation, heat-affected-zone behavior, and residual stress, and of how process variables drive joint performance
- Experience with characterization techniques and equipment, including scanning electron microscopy and energy-dispersive spectroscopy, optical microscopy, hardness testing, mechanical property testing, and spectroscopy for composition or phase
- Hands-on experience developing and qualifying welding, brazing (vacuum, furnace, or induction), and/or diffusion bonding processes, including joint design, fixturing, and parameter development
- Experience joining aluminum, copper, and dissimilar metals for thermal-management hardware, such as cold plates and microchannel heat exchangers, or for electronics packaging
- Familiarity with joining standards and specifications, such as American Welding Society D17.1 and C3.7, Aerospace Material Specification 2675, and American Society of Mechanical Engineers Section IX, and with their use in process qualification and procedure development
- Experience applying design of experiments, statistical process control, and process capability analysis to joining processes in production
- Demonstrated success in a rapidly growing, fast-paced, and highly competitive environment
- Drive to execute in a scrappy, entrepreneurial environment with tight timelines and aggressive schedules
- Hands-on experience in a high-volume manufacturing environment
ITAR REQUIREMENTS
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting, checked 20 Nov 2026. Requirements, and whether the role is still open, are settled on the employer's own page.
Selected agencies hiring now
Zobility (RGBSI)Engineering and technical staffing agency
RGBSI's staffing and workforce division, renamed Zobility (Troy, Michigan), placing engineers, technicians, IT staff and procurement and supply chain people with aerospace, defense and automotive employers.
Places: Mechanical, Avionics, Systems & Test, Technicians
Moseley Technical ServicesEngineering and technical staffing agency
Engineering and technical staffing firm in Huntsville, Alabama, placing engineers and A&P, sheet metal, CNC and quality technicians.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. You pay nothing for it, and the fee never comes out of your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Before you apply, free help with this posting: test your resume against it, draft answers to its questions or browse all our free tools.
New mechanical, structures and thermal engineering jobs in space in Texas, by email
A weekly email with the newest of them, pulled from the companies' own career sites, with the pay each one lists. Free; unsubscribe in one click.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 51.1% of its open jobs state their pay
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More mechanical, structures and thermal engineering jobs in space
- Intern Materials & Processes Engineer (all genders)
- Vehicle Development Strength Analysis Leader 5$140,737–$261,369/yr
- Mechanisms Engineering Intern
- Ground Support Design Engineer II$92,000–$115,000/yr
- Staff Project Engineer
- Staff Ground Support Design Engineer$134,000–$168,000/yr
A mechanical, structures or thermal engineer?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It's free, and one click in any email stops it.