Machine Maintenance Technician, PCB (Starlink)
- US citizenship
- ITAR / US person
- IPC J-STD-001
- IPC-A-610
How this pay compares
This posting does not state its pay. Open technician jobs in Texas post a median of $54.4k a year, the middle half $48k–$60.1k, across 7 jobs that state their pay.
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
MACHINE MAINTENANCE TECHNICIAN, PCB (STARLINK)
SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.
We are looking for talented, creative, and driven technicians to drive manufacturing output and yield. You will have ownership of one or more process areas and will have the opportunity to directly impact Starlink’s products. You will have frequent interaction with engineering teams and leadership and will participate in developing and validating new equipment, processes, and technologies. The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, security, and user experience of the products that you will manufacture.
RESPONSIBILITIES
- Perform planned maintenance and unplanned repairs of production line equipment that includes copper electroplating, chemical etching, ultrapure process water treatment, solder mask printing, automated laser and mechanical drilling, PCB layup and lamination, and/or plasma etching systems
- Perform planned maintenance and unplanned repairs of production line assets that includes SMT line equipment, epoxy dispensing printers, conveyor systems, thermal chambers, test reliability chambers, and vacuum systems
- Read and utilize schematics (mechanical/electrical/pneumatic/hydraulic) to troubleshoot systems down to the component level
- Read and safely execute lockout tagout procedures
- Utilize diagnostic equipment to monitor equipment performance, diagnose root cause, and make reliability improvement recommendations
- Use schematics, hand tools, electrical gauges, and common test equipment for calibration, diagnosis and repair, or maintenance of equipment
- Communicate with suppliers, specify requirements, get quotations, and submit purchase requisitions to purchase necessary items
- Provide feedback and work with maintenance and engineering and vendor teams to drive root cause of equipment downtime
- Conduct training for production personnel
- Operate material handling equipment including, but not limited to, scissor lifts and forklifts
- Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment
BASIC QUALIFICATIONS
- High school diploma or equivalency certificate
- 2+ years of maintenance or troubleshooting experience with mechanical, electrical, pneumatic, and/or hydraulic systems
PREFERRED SKILLS AND EXPERIENCE
- Experience maintaining PCB manufacturing equipment from vendors such as Temgtai, Benmayor, Schmoll, Shoda, Sigma Mecer, Wise, Advanced Engineering, Boffotto, Dynachem, Indubond, Machvision, or others
- Experience maintaining ASM-SMT, Flexlink, Heller, Pemtron, Koh Young, Thermotron, Envirotronic, ESpec, Mycronic, Nordson, and Beckhoff equipment
- Experience maintaining Engel plastic injection molding machines and Idra high pressure die casting machines
- 5+ years of experience as a maintenance technician or field service engineer
- Methodical approach to troubleshooting with high level of attention to detail
- Excellent manual dexterity in order to repair and perform preventative maintenance on manufacturing equipment
- Proficiently use a computer and MS Outlook and Word
- Ability to use power tools and hand tools
- Ability to read and interpret electrical, hydraulic and pneumatic schematics and drawings
- Ability to write detailed repair reports when necessary (skilled with use of Microsoft Office Suite)
- Ability to maintain a safe and clean working environment while adhering to company policies, quality policies, and industry standards
- Familiar with Lean or Six Sigma tools like Five Whys methodology
- Current or past certification for IPC-A-600, IPC-6012 or equivalent
- Current or past certification for IPC-J-STD-001 and/or IPC-A-610
ADDITIONAL REQUIREMENTS
- Must be willing to work overtime, and/or weekends as needed
- Must be willing to work one or more of the following schedules:
- A shift: 5:00am - 5:00pm (Sunday - Wednesday)
- B shift: 5:00am - 5:00pm (Thursday - Wednesday)
- C shift: 5:00pm - 5:00am (Sunday - Wednesday)
- D shift: 5:00pm - 5:00am (Thursday - Wednesday)
- Must be able to lift up to 25 lbs. unassisted
- Must be able to walk and stand for long periods of time
- Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents
- Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment
- Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces
ITAR REQUIREMENTS
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting, checked 20 Nov 2026. Requirements, and whether the role is still open, are settled on the employer's own page.
Selected agencies hiring now
Apollo Professional SolutionsEngineering and technical staffing agency
Aerospace and defense staffing firm (since 1983, recruiters across the US) placing purchasing, supply chain, planning and scheduling, project, finance and HR staff, technicians, machinists and design engineers on contract and direct hire.
Places: Programs & Business, Supply Chain, Technicians, Mechanical
Moseley Technical ServicesEngineering and technical staffing agency
Engineering and technical staffing firm in Huntsville, Alabama, placing engineers and A&P, sheet metal, CNC and quality technicians.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. You pay nothing for it, and the fee never comes out of your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Before you apply, free help with this posting: test your resume against it, draft answers to its questions or browse all our free tools.
New space manufacturing and technician jobs in Texas, by email
A weekly email with the newest of them, pulled from the companies' own career sites, with the pay each one lists. Free; unsubscribe in one click.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 51.1% of its open jobs state their pay
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More space manufacturing and technician jobs
- Manager, Ceramic Matrix Composites (CMC) Manufacturing$185,000–$205,000/yr
- Senior Manufacturing Engineer (Tank Weldment/Primary Structure)$150,000–$190,000/yr
- Test Technician (all genders)
- Lead IT Network Infrastructure Technician (Night Shift)
- Manufacturing Engineering Manager$247,000–$315,000/yr
- Senior Test Technician$32–$40/hr
A certified technician, machinist or welder?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It's free, and one click in any email stops it.