Pipefitter
- US citizenship
- ITAR / US person
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. ## PIPEFITTER We are seeking a Pipefitter to support buildout of supercomputer and power plant piping at Starbase.
In this hands-on role, you will install large industrial piping systems and keep construction moving on cooling, utility, and power-plant infrastructure. ## RESPONSIBILITIES - Install large-bore industrial piping (process, mechanical, utility, cooling, and power-plant systems): measure, cut, bevel, fit, hang, and make up joints per drawings and specs - Perform flange, groove, thread, and welded-joint fit-up; align pipe, set gaps, and prep joints for the welding crew - Install valves, fittings, hangers, supports, strut, and anchors; hang pipe racks and supports plumb and on grade - Read isometric, spool, and arrangement drawings; field-route as directed and flag drawing conflicts before install - Support hydro, pneumatic, and service tests: install blinds and test packs, walk lines, and repair leaks - Stage, move, and inventory pipe, valves, hangers, insulation, tools, and equipment; keep laydown yards and mechanical rooms orderly - Assist with equipment set for pumps, cooling towers, air handlers, and related mechanical gear, including bolt-up of suction and discharge piping - Open and close work areas: protection, debris removal, scrap segregation, and end-of-shift reset so the next crew can start immediately - Follow LOTO, PPE, and permit rules; do not work on live systems without authorization - Report damaged material, unsafe conditions, and drawing conflicts immediately ## BASIC QUALIFICATIONS - High school diploma or equivalency certificate - 1+ years installing large industrial or commercial piping; OR completion of a recognized pipefitter apprenticeship; OR equivalent military experience ## PREFERRED SKILLS AND EXPERIENCE - Experience fitting and installing welded, flanged, grooved, and/or threaded pipe, including hangers and supports - Ability to use pipefitting hand tools, power tools, bevelers, and material-handling equipment safely - Strong safety mindset and willingness to follow site procedures, including LOTO and permits - Prior experience on data center, power plant, industrial, or heavy-civil construction sites - Experience on large-bore welded industrial piping (carbon and/or stainless) and equipment connections (pumps, air handlers, cooling towers, skids) - Ability to read isometric, spool, and P&ID drawings - UA, NCCER, or equivalent pipefitter credential - OSHA 10 or equivalent training - Familiarity with hot-work, hydrotest, and flange-management practices ## ADDITIONAL REQUIREMENTS - Must be able to work all shifts, overtime and/or weekends as needed - Able to stand for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift up to 25lbs. unassisted - Able to work under adverse conditions (e.g., dirty, noisy, or confined spaces) ## ITAR REQUIREMENTS - To conform to U.S.
Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting, checked 7 Nov 2026. The employer's own page is the final word on requirements and availability.
Selected agencies hiring now
NESC Staffing (Nesco Resource)Engineering and technical staffing agency
Engineering and technical staffing firm placing engineers, designers, technicians and manufacturing staff on contract and direct hire.
Places: Mechanical, Avionics, Systems & Test, Technicians
Contract Professionals Inc (CPI)Engineering and technical staffing agency
Aerospace and defense staffing firm in Waterford, Michigan, placing engineers, maintenance technicians, mechanics, welders and CNC machinists.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. It costs you nothing and never changes your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Free tools for this application: check your resume against this job, answer the application's questions or see every free tool.
New space manufacturing and technician jobs in Texas, by email
One email a week with the newest ones, straight from the employers' own careers sites, with the pay each posting states. Free, stop anytime.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 53.2% of its open jobs state an hourly rate
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More space manufacturing and technician jobs
- Senior Manufacturing Engineer I - Avionics & Test$115,200–$144,000/yr
- Senior Manufacturing Engineer II - Avionics & Test$132,000–$176,000/yr
- Manufacturing Engineer$100,000–$130,000/yr
- Manufacturing Engineer (Tanks)$68,000–$80,000/yr
- CNC Lathe Machinist I and II, Prototype Shop$29–$40/hr
- Manufacturing Engineer, Machining & Additive Associate (Winter 2027)$1,925/wk
A certified technician, machinist or welder?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It costs nothing and you can stop anytime.