Welder (Starship) – Temporary
- Temporary
- US citizenship
- ITAR / US person
- Welding certification
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not.
Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. ## WELDER (STARSHIP) - TEMPORARY Welders in this temporary position will participate in an accelerated training program at the SpaceX South Texas build site, preparing to qualify for welding on the Starship and Super Heavy vehicles through intensive hands-on instruction and certification.
Under the mentorship of seasoned experts, trainees will simulate and progressively master the fabrication of the primary airframe, including cylindrical tanks, bulkheads, and large associated structures, building the precision skills needed for flight-ready hardware.
Upon successful qualification, participants will join an elite team to rapidly execute these fabrication tasks, advancing the production of groundbreaking multiplanetary vehicles. ## RESPONSIBILITIES - Perform GTAW class A welds; cut, trim, fit and fabricate metal components to dimensions for building and assembling - Collaborate with lead welder to ensure that the proper weld procedure, type of material and rod size are accurately assessed for each welding project - Analyze engineering drawings and specifications to plan welding operations where procedural information is unavailable - Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly - Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment - Weld assembly and fabrication of various small to large scale structures and assemblies - Effectively communicate with management/supervisors, engineering staff and planners to achieve build efficiency - Modify repair, assemble, and install launch vehicles - Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing - Handle and dispose of hazardous materials in approved manner - Install and assemble custom and off-the-shelf tooling and machinery for building primary tank structure - Setup safety equipment and work platforms at elevation - Operate general shop equipment and vehicles (forklifts, boom lifts, scissor lifts, etc.) ## POSITION DETAILS This is a temporary position with SpaceX for the duration stated, subject to change with minimal notice based on business needs.
Temporary employees who successfully complete the assignment may be eligible for conversion to full-time roles. - LENGTH OF POSITION: 1 month - LOCATION: Brownsville, TX - SHIFT: Must be available for all shifts (day shift, 6 AM - 6 PM or night shift, 6 PM - 6 AM), overtime and weekends as the schedule varies depending on site operational needs; flexibility is required ## BASIC QUALIFICATIONS - High school diploma or equivalency certificate - 1+ month of experience welding or certificate of completion for welding from an accredited program within the last 2 years ## PREFERRED SKILLS AND EXPERIENCE - 3+ years of experience in TIG welding with one or more of the following materials: stainless steel, carbon steel, Inconel, aluminum and titanium - Highly proficient in tube cutting, grinding and fabrication - Highly experience in class A welds - Certifications with AWS D17.1 and D1.2 - Knowledge in DC welding techniques, and engineering requirements - Knowledge in standard tools, materials, motions, and practices of the welding trade - Knowledge in occupational hazards and effective safety precautions of the trade - Knowledge in arc air procedures and equipment - Experience in overhead cranes and forklifts - Use of precision measuring instruments - Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment ## ADDITIONAL REQUIREMENTS - Role requires passing a weld test per AWS D17.1 - Must be available for all shifts (day shift, 6 AM - 6 PM or night shift, 6 PM - 6 AM), overtime and weekends as the schedule varies depending on site operational needs; flexibility is required - Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand - Ability to work at elevated heights (up to 200 feet) and in confined spaces - Typically exposed to work in extreme outdoor environments – heat, cold, rain - Work performed in an environment requiring exposure to fumes, odors, and noise - Stand: Up to 10 hours per day - Sit: Up to 1 hour per day - Push/Pull: Up to 75lbs.
(unassisted) 30 minutes to 1 hour per day - Overhead reach: Up to 6 hours per day - Walk: Up to 6 hours per day - Lift/Carry: Up to 50lbs.
(unassisted) 15 minutes or less per day - Climb (ladder/stairs): Up to 3 hours per day - Kneel/Crouch: Up to 6 hours per day - Upper body twist: Up to 6 hours per day - Ability to work in temperatures over 80 degrees 30 minutes or less per day - Candidate must be capable of safely using an air purifying respirator, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description.
Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review. ## ITAR REQUIREMENTS - To conform to U.S.
Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting, checked 7 Nov 2026. The employer's own page is the final word on requirements and availability.
Selected agencies hiring now
Chipton-RossEngineering and technical staffing agency
Aerospace and defense engineering staffing firm with offices in El Segundo, Long Beach and Playa Del Rey, California, Charleston, Pascagoula and Newport News, placing engineers, designers and technicians on contract and direct hire.
Places: Mechanical, Avionics, Systems & Test, Technicians
Contract Professionals Inc (CPI)Engineering and technical staffing agency
Aerospace and defense staffing firm in Waterford, Michigan, placing engineers, maintenance technicians, mechanics, welders and CNC machinists.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. It costs you nothing and never changes your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Free tools for this application: check your resume against this job, answer the application's questions or see every free tool.
New space manufacturing and technician jobs in Texas, by email
One email a week with the newest ones, straight from the employers' own careers sites, with the pay each posting states. Free, stop anytime.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 53.2% of its open jobs state an hourly rate
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More space manufacturing and technician jobs
- Senior Manufacturing Engineer I - Avionics & Test$115,200–$144,000/yr
- Senior Manufacturing Engineer II - Avionics & Test$132,000–$176,000/yr
- Manufacturing Engineer$100,000–$130,000/yr
- Manufacturing Engineer (Tanks)$68,000–$80,000/yr
- CNC Lathe Machinist I and II, Prototype Shop$29–$40/hr
- Manufacturing Engineer, Machining & Additive Associate (Winter 2027)$1,925/wk
A certified technician, machinist or welder?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It costs nothing and you can stop anytime.