Supervisor, Power Generation Fluid Systems
- US citizenship
- ITAR / US person
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. ## SUPERVISOR, POWER GENERATION FLUID SYSTEMS Starbase is standing up on-site supercomputer power generation.
The supervisor of power generation fluid systems will lead technicians fabricating, installing, testing, and commissioning piping and components for natural gas, instrument air, demineralized water, cooling water, aqueous ammonia, and associated valves, pumps, heat exchangers, and instrumentation - from prefab/spool yard through field tie-in.
You will take technical direction from engineering and turn it into installed, leak-tight, spec-compliant systems and expected to work side by side with the crew when the work demands it, and to build a team that can eventually cover day and night operations. ## RESPONSIBILITIES - Supervise prefab/spool-yard and field fluid-system work, including daily schedules, workflow, and multi-shift handoff - Lead and manage a staff of fluid systems technicians, including hiring input, training, and all performance-management tasks - Organize, assign, and track work so spool fabrication, install, field tie-in, test, and punchlist move cleanly across shifts - Fabricate, install, and personally tie in (and hold the crew to the same standard) fluid system components from P&IDs, isometric drawings, and engineering sketches, including: Stainless steel, carbon steel, and aluminum piping and tubing, including large-bore - Ball, check, control, and isolation valves - Pumps, strainers, heat exchangers, and dry coolers - Pressure regulators, relief devices, sensors, and gauges - Own plant fluid systems for aeroderivative / industrial gas-turbine power generation, including natural gas fuel, instrument air, demineralized water, cooling water, and 19% aqueous ammonia (SCR) systems - Read and interpret work instructions, P&IDs, data sheets, manuals, and drawings; recommend changes that simplify the build and raise rate without sacrificing quality - Perform and supervise hydrostatic, pneumatic, and leak testing; troubleshoot and repair issues found during activation or production use - Connect and verify instrumentation (pressure transducers, thermocouples, flow, and similar) as required for system checkout - Assess skillsets, identify training needs, and build training so the crew can work natural gas, 19% aqueous ammonia, instrument air, demin, and cooling systems safely - Monitor labor hours and overtime; implement time-management and improvement plans with the staff - Provide data and reporting to support departmental metrics and improvement objectives - Ensure product quality and conformance to specifications, codes, and engineering requirements - Maintain tooling, consumables, and critical-spares inventory - Improve area safety and efficiency through regular auditing and continuous improvement (lockout/tagout, hot work, line break, chemical handling) - Initiate and foster cooperation with millwrights, electrical, engineering, OEM advisors, construction, and datahall operations - Continuously improve processes and crew efficiency, utilization, and productivity ## BASIC QUALIFICATIONS - High school diploma or equivalency certificate - 5+ years of hands-on experience fabricating, installing, testing, and/or commissioning industrial fluid systems (piping, tubing, valves, pumps, and instrumentation) - 2+ years of experience leading a crew, shift, or project (supervisor, lead, or equivalent) in a production, construction, test, or plant environment ## PREFERRED SKILLS AND EXPERIENCE - 10+ years of fluid-system fabrication and install in a fast-paced power generation, industrial, or mission-critical facilities environment - Experience tying in pipe (field fit-up and connection of fabricated spools or systems - not supervision-only) - Direct experience on gas-turbine or combined-cycle balance-of-plant systems (fuel gas, demineralized water, condensate/feedwater, cooling water, lube oil, or similar) - Hands-on work with one or more of: natural gas piping, aqueous or anhydrous ammonia systems, demineralized water, high-purity water, or data-center cooling (chilled water, condenser water, dry coolers) - Experience bringing a fluid system from development / first article into repeatable production or commissioned plant operation - Experience with pneumatic/hydraulic system fabrication and high-pressure liquid and gas testing - Ability to read P&IDs, isometric drawings, and OEM manuals and turn them into field work - Familiarity with applicable piping codes and practices (e.g.
ASME B31.1 / B31.3), lockout/tagout, and line-break / energy-isolation procedures - Professional experience with calibrated measuring instruments - Experience using heavy equipment (overhead cranes, forklifts, manlifts) - Able to adapt to changing work assignments in a fast-paced environment - Demonstrated ability to hire, train, and retain a high-performing technician crew ## ADDITIONAL REQUIREMENTS - Must be available to work extended hours and weekends, which varies depending on site operational needs; flexibility required ## ITAR REQUIREMENTS - To conform to U.S.
Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting, checked 7 Nov 2026. The employer's own page is the final word on requirements and availability.
Selected agencies hiring now
NESC Staffing (Nesco Resource)Engineering and technical staffing agency
Engineering and technical staffing firm placing engineers, designers, technicians and manufacturing staff on contract and direct hire.
Places: Mechanical, Avionics, Systems & Test, Technicians
Contract Professionals Inc (CPI)Engineering and technical staffing agency
Aerospace and defense staffing firm in Waterford, Michigan, placing engineers, maintenance technicians, mechanics, welders and CNC machinists.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. It costs you nothing and never changes your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Free tools for this application: check your resume against this job, answer the application's questions or see every free tool.
New space manufacturing and technician jobs in Texas, by email
One email a week with the newest ones, straight from the employers' own careers sites, with the pay each posting states. Free, stop anytime.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 53.2% of its open jobs state an hourly rate
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More space manufacturing and technician jobs
- Senior Manufacturing Engineer I - Avionics & Test$115,200–$144,000/yr
- Senior Manufacturing Engineer II - Avionics & Test$132,000–$176,000/yr
- Manufacturing Engineer$100,000–$130,000/yr
- Manufacturing Engineer (Tanks)$68,000–$80,000/yr
- CNC Lathe Machinist I and II, Prototype Shop$29–$40/hr
- Manufacturing Engineer, Machining & Additive Associate (Winter 2027)$1,925/wk
A certified technician, machinist or welder?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It costs nothing and you can stop anytime.