Maintenance Technician - Level 4/5
- US citizenship
- ITAR / US person
- Driver's license
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not.
Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. ## MAINTENANCE TECHNICIAN - LEVEL 4/5 We are looking for a maintenance technician to install and maintain the Starship test stand's electrical, mechanical, and fluid systems in preparation for test operations.
These systems include hydraulics, high-pressure nitrogen/helium, and cryogenic systems. In addition to the required experience below, our ideal candidate shows personal initiative, maintains composure, and fosters a positive environment. In this role, it is important to be responsible, hardworking, and conscientious about the quality of work performed.
The maintenance technician will need to take the lead in making suggestions and not get discouraged along the way.
Additionally, they must produce high-quality work promptly while continually looking for process improvements, streamlining, and cost savings. ## RESPONSIBILITIES - Fabricate and install fluid system components from a schematic or engineering drawing, including, but not limited to, ball valves, check valves, pressure regulators, and pressure gauges - Troubleshoot operational issues found during the activation of controls, fluids, and mechanical systems - Work with a team of technicians and engineers to ensure every system is operating with the highest level of quality to support the 100% successful launch of a multimillion-dollar launch vehicle - Operate heavy machinery, including forklifts and aerial platforms - Perform hands-on operations with both large and small fragile assemblies - Perform maintenance tasks as required in a variety of roles for vehicle integration, pad maintenance, site preventative maintenance, general facilities, and any other general maintenance work to maintain an operational launch site (including corrosion control) - Create, maintain, and edit written work orders and instructions - Perform lockout/tagout (LOTO) procedures and fluid system configuration procedures, ensuring all physical and administrative actions are completed safely and accurately - Monitor and interpret critical instrumentation data to assess the health and performance of fluid systems ## BASIC QUALIFICATIONS - High school diploma or equivalency certificate - 7+ years of experience performing maintenance or installation work on mechanical and low-voltage control systems ## PREFERRED SKILLS AND EXPERIENCE - NCCER Instrumentation certification - Experience working on a rocket launch pad and directly supporting launch operations - Experience in military aviation as a propulsion or airframe technician - Experience using heavy equipment (overhead cranes, forklifts, and man lifts) - Experience following detailed schematics and fabricating fluid panels from said schematics - Knowledge of hydraulic/cryogenic systems and operations - Experience explaining the differences between test setups: hydraulic vs. pneumatic vs. thermal and between sensors (load cells, differential pressure transducers, thermocouples, etc.) - Experience maintaining and troubleshooting complex controls, fluids, and mechanical systems - Experience routing tubes in the field to a high level of accuracy - Experience in safely rigging and moving items under 20,000 lbs. - Experience operating and building a flush cart, proof cart, and leak check cart - Experience working in a clean room environment - Familiarity with calibrated measurement devices, including load cells, multimeters, calipers, torque wrenches, depth gauges, and micrometers ## ADDITIONAL REQUIREMENTS - Typical hours for this position, excluding overtime, are Monday - Friday, 6:00 AM - 4:30 PM - Must be available for overtime and weekends as the schedule varies depending on site operational needs; flexibility is required - Ability to support shift rotations as site needs change - Flight hardware is typically built in tight quarters, and physical dexterity is required - Valid driver's license and a clean driving record - Typically exposed to work in extreme outdoor environments - heat, cold, rain - Work performed in an environment requiring exposure to fumes, odors, and noise - Must be able to travel to other SpaceX facilities when needed (up to 25% travel) - Stand: Up to 10 hours per day - Sit: Up to 3 hours per day - Push/Pull: Up to 75lbs.
(unassisted) between 1 to 2 hours per day - Overhead reach: Up to 10 hours per day - Walk: Up to 10 hours per day - Lift/Carry: Up to ≤ 50 lbs.
(unassisted) between 1 to 2 hours per day - Climb (ladder/stairs): Up to 6 hours per day - Kneel/Crouch: Up to 10 hours per day - Upper body twist: Up to 6 hours per day - Ability to work in temperatures over 80 degrees for 6 hours or greater per day - Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description.
Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review. ## ITAR REQUIREMENTS - To conform to U.S.
Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting, checked 7 Nov 2026. The employer's own page is the final word on requirements and availability.
Selected agencies hiring now
Sterling EngineeringEngineering and technical staffing agency
Engineering and technical staffing firm for manufacturers, aerospace suppliers among them.
Places: Mechanical, Technicians, Quality
Moseley Technical ServicesEngineering and technical staffing agency
Engineering and technical staffing firm in Huntsville, Alabama, placing engineers and A&P, sheet metal, CNC and quality technicians.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. It costs you nothing and never changes your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Free tools for this application: check your resume against this job, answer the application's questions or see every free tool.
New space manufacturing and technician jobs in Texas, by email
One email a week with the newest ones, straight from the employers' own careers sites, with the pay each posting states. Free, stop anytime.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 53.2% of its open jobs state an hourly rate
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More space manufacturing and technician jobs
- Senior Manufacturing Engineer I - Avionics & Test$115,200–$144,000/yr
- Senior Manufacturing Engineer II - Avionics & Test$132,000–$176,000/yr
- Manufacturing Engineer$100,000–$130,000/yr
- Manufacturing Engineer (Tanks)$68,000–$80,000/yr
- CNC Lathe Machinist I and II, Prototype Shop$29–$40/hr
- Manufacturing Engineer, Machining & Additive Associate (Winter 2027)$1,925/wk
A certified technician, machinist or welder?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It costs nothing and you can stop anytime.