Corrosion Control Technician
- US citizenship
- ITAR / US person
- Driver's license
About the job
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not.
Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. CORROSION CONTROL TECHNICIAN As a corrosion control technician for ground support equipment fabrication, you will apply and maintain coating systems that protect critical hardware and infrastructure.
You will identify, remove, and treat corrosion, prepare surfaces, and apply coatings to meet strict quality standards while keeping pace with a demanding production schedule. ## RESPONSIBILITIES - Sandblast to acceptable industry standards - Operate spray coating equipment to industrial and commercial standards - Operate air tools, pressure feed tanks, and airless pumps - Quality brush and roll industrial and commercial coatings - Corrosion control on carbon steel/stainless steel using pneumatic air tools, needle guns, and scalers - Safe operation of aerial platforms, forklifts, and heavy equipment - Identify hazards in production and take action to reduce risk before work begins ## BASIC QUALIFICATIONS - High school diploma or equivalency certificate - 2+ years of corrosion control, painting, or sand blasting experience in an industrial environment ## PREFERRED SKILLS AND EXPERIENCE - 5+ years of industrial painting experience - Familiarity with the National Association of Corrosion Engineers (NACE), material safety data sheet (MSDS), and Environmental Protection Agency (EPA) regulation codes or industry standards - Understanding of heavy equipment safety standards - Ability to follow detailed instructions - Experience working at a rocket launch facility and supporting launch campaigns - Self-motivated individual able to work independently or in a team environment and willing to learn - Ability to assume responsibility, work with little or no supervision, be flexible, perform duties, and handle multiple tasks under potentially stressful conditions - Strong attention to detail, documentation, and quality control - Coating types, application methods, dry film thickness measurement, holiday detection, and adhesion testing ## ADDITIONAL REQUIREMENTS - Typical hours for this position, excluding overtime, are Monday - Friday, 6:00 AM – 6:00 PM - Must be available for overtime and weekends as the schedule varies depending on site operational needs; flexibility is required - Valid driver’s license - Must be able to work outdoors in extreme weather and perform heavy physical labor in a safe manner.
Work in extreme temperatures due to weather conditions and operating equipment - Must be able to work in an environment requiring exposure to fumes, odors, and noise - Stand: Up to 6 hours per day - Sit: Up to 6 hours per day - Push/Pull: Up to 75lbs. (unassisted) 15 minutes or less per day - Overhead reach: Up to 6 hours per day - Walk: Up to 6 hours per day - Lift/Carry: Up to ≤ 50 lbs.
(unassisted) 15 minutes or less per day - Climb (ladder/stairs): Up to 6 hours per day - Kneel/Crouch: Up to 3 hours per day - Upper body twist: Up to 3 hours per day - Ability to work in temperatures over 80 degrees 6 hours or greater per day - Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description.
Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review. ## ITAR REQUIREMENTS - To conform to U.S.
Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .
From SpaceX's job posting, checked 7 Nov 2026. The employer's own page is the final word on requirements and availability.
Selected agencies hiring now
Chipton-RossEngineering and technical staffing agency
Aerospace and defense engineering staffing firm with offices in El Segundo, Long Beach and Playa Del Rey, California, Charleston, Pascagoula and Newport News, placing engineers, designers and technicians on contract and direct hire.
Places: Mechanical, Avionics, Systems & Test, Technicians
Contract Professionals Inc (CPI)Engineering and technical staffing agency
Aerospace and defense staffing firm in Waterford, Michigan, placing engineers, maintenance technicians, mechanics, welders and CNC machinists.
Places: Propulsion, Mechanical, Avionics, RF & Payloads
These agencies and apps pay SpaceJobs.Now a referral fee when someone we introduce is placed or signs up. It costs you nothing and never changes your pay. Employers' own jobs below keep their own order.
Sponsored jobs from job networks, which pay SpaceJobs.Now when you click one.
Free tools for this application: check your resume against this job, answer the application's questions or see every free tool.
New space manufacturing and technician jobs in Texas, by email
One email a week with the newest ones, straight from the employers' own careers sites, with the pay each posting states. Free, stop anytime.
About SpaceX
Designs, manufactures and launches advanced rockets and spacecraft.
Pay on its listings: 53.2% of its open jobs state an hourly rate
How it pays: Paid as an employee on SpaceX's own payroll (salaried or hourly, as each posting states).
More space manufacturing and technician jobs
- Senior Manufacturing Engineer I - Avionics & Test$115,200–$144,000/yr
- Senior Manufacturing Engineer II - Avionics & Test$132,000–$176,000/yr
- Manufacturing Engineer$100,000–$130,000/yr
- Manufacturing Engineer (Tanks)$68,000–$80,000/yr
- CNC Lathe Machinist I and II, Prototype Shop$29–$40/hr
- Manufacturing Engineer, Machining & Additive Associate (Winter 2027)$1,925/wk
A certified technician, machinist or welder?
One profile for every employer here. Space companies and their recruiters ask us for people with a specific degree, clearance, specialty or location: add yours once, and when a job fits, we introduce you, only with your yes. Free.
SpaceX openings, sent to you weekly
Each week we send the newest postings from SpaceX's own careers site, along with similar openings at other space employers. It costs nothing and you can stop anytime.